This is a 20 ounce stainless steel lined, red cedar cladded exterior, beverage container. The lid is slip-fit and clear (so you can see how much of your beverage remains). I also include a reusable metal straw (that is dishwasher safe). The main body is not dishwasher safe— it’s recommended you rinse out the inside in the sink and quickly hand dry the outside. Although this is finished with a multi-layer process, wood and water love each other and will do funny things when left to their own devices.
This tumbler is made from laminated hobby board that was used on a different project. The pieces are all glued together at the factory to make a custom board size from 1×1 pieces of pine. I took the pieces and glued them to make the blank for this mug. On every side of this piece there’s a something going on and it’s never boring.
This will still be one of those mugs that will be completely different to everyone else’s same colored Stanley or yeti mugs.
As wood is thermally resistant, and the foaming polyurethane glue I use to keep everything in place is also an insulator, this beverage container will do a reasonable job in keeping hot things hot and cold things cold (without all the summertime sweating).
This mug is over 9 inches tall and 4 1/5 inches wide. I try to make my beverage containers available to fit most car cup holders. This is just a touch over 3 inches at the base.
Ships via USPS Priority Mail Flat Rate.
This is a 20 ounce stainless steel lined, red cedar cladded exterior, beverage container. The lid is slip-fit and clear (so you can see how much of your beverage remains). I also include a reusable metal straw (that is dishwasher safe). The main body is not dishwasher safe— it’s recommended you rinse out the inside in the sink and quickly hand dry the outside. Although this is finished with a multi-layer process, wood and water love each other and will do funny things when left to their own devices.
This tumbler is made from laminated hobby board that was used on a different project. The pieces are all glued together at the factory to make a custom board size from 1×1 pieces of pine. I took the pieces and glued them to make the blank for this mug. On every side of this piece there’s a something going on and it’s never boring.
This will still be one of those mugs that will be completely different to everyone else’s same colored Stanley or yeti mugs.
As wood is thermally resistant, and the foaming polyurethane glue I use to keep everything in place is also an insulator, this beverage container will do a reasonable job in keeping hot things hot and cold things cold (without all the summertime sweating).
This mug is over 9 inches tall and 4 1/5 inches wide. I try to make my beverage containers available to fit most car cup holders. This is just a touch over 3 inches at the base.
Ships via USPS Priority Mail Flat Rate.
